Based in Pomona, CA. Free on-site estimates across the Pomona Valley. Call (909) 699-1776
Gray and black flake epoxy garage floor with a gloss topcoat in Diamond Bar
Gray, white and gold metallic epoxy floor swirls in Pomona
Light gray solid color epoxy floor with a high gloss finish in Irwindale
Garage, patio and commercial floors

Epoxy Flooring Pomona, CA

Flake, metallic, solid color and quartz floors over diamond-ground concrete, finished with a UV-stable polyaspartic topcoat for Pomona heat.

  • One-day flake garage floors
  • Limited lifetime adhesion warranty
  • Moisture test on every slab
  • Free on-site estimate

★★★★★ 5-Star Rated · 93 reviews on Google, Facebook, Houzz & more

Free on-site estimate

Tell us about the floor and we will call you back to book a visit.

Or call (909) 699-1776

Projects from$2,600two-car flake garage, installed
Flake install1 daywalk on it the same night
WarrantyLimited lifetimeadhesion warranty, in writing
EstimateFreeon-site, with a moisture test
Pomona prices, up front

How much does epoxy flooring cost in Pomona?

Epoxy flooring in Pomona costs $6.50 to $18.50 per square foot depending on the system, and projects start at $2,600. A two-car flake garage of up to 400 sq ft runs $2,600 to $4,000 installed, including diamond grinding, crack repair, materials and labor, and the crew finishes it in one day.

Solid color floors run $3,800 to $4,600 for the same garage, and metallic floors $5,000 to $7,400. Our price table lists all seven systems. Permits for garage conversions or additions go through the City of Pomona building and safety office, and a floor coating over an existing slab does not change the structure.

Your exact number comes from a free visit. We measure the room, look at cracks and old paint, and run a moisture test, because a slab that sweats moisture changes which basecoat we use and what the job costs.

Two-car garage with a gray flake epoxy garage floor and wood shelving in Charter OakFlake epoxy garage floor coating, Charter Oak
Who coats your floor

A Pomona coating company that preps every slab the same way

Ping Epoxy Floors is a service-area business based in Pomona. We come to you, so the estimate, the install and the final walkthrough all happen at your property, whether that is a bungalow garage in Wilton Heights or a shop floor in an industrial park.

Every floor starts with diamond grinding to the bonding profile the coating maker specifies. Then comes crack repair, a moisture-barrier epoxy basecoat, the decorative layer, and a UV-stable polyaspartic topcoat. Skipping the grind is the main reason store-bought garage floor coating kits peel within a year or two.

Garages are most of our work. We also coat patios, driveways and pool decks, interior rooms, and commercial floors such as shops, gyms and showrooms. If you want the full comparison of garage options first, start with our garage floor epoxy guide.

Each floor carries a limited lifetime adhesion warranty, which covers the bond between the coating and your concrete. We go over the written terms at the estimate, before you sign anything.

Freshly coated gray flake garage floor with a clean polyaspartic topcoat in MontclairGray flake garage floor, Montclair
What we coat

Garages, patios, living spaces and business floors

Most Pomona calls start with the garage. Plenty end with the patio too, once people see how the same prep and topcoat hold up outside.

Wide two-car garage with a light gray epoxy garage floor in Baldwin Park1 day

Garage floors

Flake, solid or metallic over a ground slab, with a topcoat rated for hot-tire pickup. See our flake garage floors.

Light flake pool deck coating around a backyard pool in Glendora1-2 days

Patio, driveway, pool deck

Slip-resistant polyaspartic over outdoor concrete that bakes in the sun. Read about pool deck coating.

White and gray metallic epoxy floor in a furnished living room in La Puente3-4 days

Interior rooms

Metallic or solid color floors for living rooms, studios and basements. Browse our metallic epoxy floors.

Large warehouse with a gray flake commercial epoxy floor and skylights in OntarioQuoted

Commercial floors

Shops, showrooms, gyms and warehouses, quoted after a site visit. Learn about commercial epoxy flooring.

Pick your finish

Four floor systems, matched to your slab and your use

Each system has its own page with photos, prices and answers. Polyaspartic, a type of polyurea, is the topcoat on nearly every floor we install because it cures fast and holds its color in the sun. Slabs that only need protection can get grind and seal instead, and you can pick flake blends on our color chart.

Gloss flake epoxy flooring with gray and black chips in MontclairFrom $2,600

Flake epoxy

A full broadcast of vinyl chips hides dust and tire marks and adds grip. Our most requested garage floor.

See the system
Pale solid color epoxy floor beside large windows in UplandFrom $3,800

Solid color epoxy

One clean color for shops, gyms and garages you keep tidy. It shows slab flaws, so prep carries the job.

See the system
Close view of gray, white and gold metallic epoxy floor swirls in PomonaFrom $5,000

Metallic epoxy

Pigments worked by hand into swirls of depth. No two floors come out the same, and that is the point of it.

See the system
Dense multi-color broadcast epoxy floor surface in CoronaFrom $3,600

Quartz & sand finish

Colored quartz or sand broadcast under clear coats, for wet rooms and ramps where traction matters.

See the system
The flake process

Our 8-step flake process, from bare slab to topcoat

This is the flake process we follow on a Pomona garage. Solid, metallic and quartz floors share the first four steps and change after the basecoat.

Close view of a full broadcast gray flake floor under a polyaspartic topcoat in Claremont
  1. Moisture and crack check

    We test the slab for moisture and mark every crack, spall and oil stain before any grinding starts.

  2. Diamond grinding

    Diamond grinding opens the surface to the bonding profile the coating maker asks for, edge to edge.

  3. Crack and pit repair

    Cracks and pits get filled with a polyurea repair compound and ground flush with the slab.

  4. Vacuum and clean

    A HEPA vacuum pulls the dust out of the pores so the basecoat bonds to concrete, not powder.

  5. Moisture-barrier basecoat

    A moisture-barrier epoxy basecoat goes down in the tint that matches your flake blend.

  6. Full flake broadcast

    Flake goes on by hand until the wet basecoat disappears, a full-rejection flake broadcast.

  7. Scrape and vacuum

    Once the base cures, the crew scrapes off loose chips and vacuums the floor twice.

  8. Polyaspartic topcoat

    A UV-stable polyaspartic topcoat seals the flake and resists hot-tire pickup. You can walk on it that night.

Built for Pomona Valley heat

What Pomona summers and old slabs do to a garage floor

Pomona sits at about 850 feet in the Pomona Valley, with hot, dry summers and fall Santa Ana winds out of the northeast. A garage slab here can stay hot well into the evening. Cheap epoxy softens under hot tires and lifts. A UV-stable polyaspartic topcoat rated for hot-tire pickup holds.

The housing stock varies a lot across 91766, 91767 and 91768. Lincoln Park and the other historic districts hold early 20th century homes whose garages often have thin, patched slabs with old paint. Phillips Ranch, built out since the 1980s in the hills toward Diamond Bar, has newer slabs that still need grinding, because the smooth trowel finish gives a coating nothing to grip.

Older slabs poured without a vapor barrier can push moisture up through the floor. That is why we test first and use a moisture-barrier basecoat when the reading calls for it. Floors with heavy moisture or a lot of damage do best with flake, and our solid color page explains why.

Coated backyard patio around a fire pit and spa on a sunny day in Charter OakPatio concrete coating, Charter Oak
Installed prices

Epoxy floor prices in Pomona, by system

Typical two-car garage means up to 400 sq ft. Every project starts at $2,600, and commercial and industrial floors are quoted after a free site visit. The price includes grinding, standard crack repair, materials and labor.

SystemPer sq ftTypical two-car garage (up to 400 sq ft)Install time
Flake epoxy$6.50-$10 per sq ft$2,600-$4,0001 day
Solid color epoxy$9.50-$11.50 per sq ft$3,800-$4,6003 days
Metallic epoxy$12.50-$18.50 per sq ft$5,000-$7,4003-4 days
Quartz & sand finish$9-$16.50 per sq ft$3,600-$6,6002-3 days
Grind and seal$6.50-$9 per sq ft$2,600-$3,6001-2 days
Patio, driveway & pool deck coating$8-$12 per sq ft$3,200-$4,8001-2 days
Commercial & industrialQuoted after a free site visitQuoted after a free site visitDepends on size and downtime

Prices and details reviewed November 2026.

Want a single number for your own floor? Send the estimate form with the room size, or see what the work looks like on our project gallery.

Recent floors

Floors we have coated around the Pomona Valley

Tap any photo to see it full size. More systems and rooms are on the full gallery page.

Where we work

Pomona and the cities around it

We work across Pomona and the nearby Los Angeles and San Bernardino County cities below. Each page covers that city's own housing, climate and common floor problems. The full list is on our service areas page.

Pomona questions

Epoxy garage floor questions we hear in Pomona

How much is an epoxy garage floor in Pomona?

A two-car epoxy garage floor in Pomona costs $2,600 to $4,000 for a flake system of up to 400 sq ft, installed in one day. Solid color runs $3,800 to $4,600 and metallic $5,000 to $7,400. Every project starts at $2,600, and the free estimate sets your exact price.

How long does an epoxy garage floor take to install?

A flake garage floor takes one day, and you can walk on it that evening. Plan on 24 hours before you park. Solid color takes 3 days, metallic 3-4 days, quartz and sand finish 2-3 days, and grind and seal or outdoor coatings 1-2 days.

Is polyaspartic better than epoxy for a garage?

We use both. Epoxy makes a strong, moisture-tolerant basecoat, and polyaspartic, a type of polyurea, makes the better topcoat because it cures fast, stays clear in UV light and resists hot-tire pickup. Most of our Pomona garage floors combine the two.

Will the coating peel from hot tires?

A floor peels from hot tires when the slab was not ground or the topcoat softens in heat. We diamond grind every slab and finish with a polyaspartic topcoat rated for hot-tire pickup, which is why we can back the bond with a limited lifetime adhesion warranty.

Can you coat a garage floor with cracks or old paint?

Yes. Grinding removes old paint and coatings, and we fill cracks and pits with a polyurea repair compound before the basecoat. Flake hides repaired cracks best. Large moving cracks can show through any coating, and we point those out at the estimate.

Do you coat patios, driveways and pool decks?

Yes. Patio, driveway and pool deck coating runs $8 to $12 per sq ft and takes 1-2 days. We use a slip-resistant polyaspartic system made for sun and water, and our outdoor coatings page covers the options.

Do you work outside Pomona?

Yes. We cover the Pomona Valley, including Claremont, La Verne, San Dimas, Diamond Bar, Chino and Ontario, plus nearby cities such as Montclair, Walnut and Upland. The estimate is free in every one of them.

What warranty comes with the floor?

Every floor carries a limited lifetime adhesion warranty, which covers the bond between the coating and the concrete. We give you the written terms at the estimate so you know what is covered before the work starts.

Free on-site estimate

Ready to see your slab coated?

We measure, test the concrete for moisture and give you a written price before any work starts. Projects start at $2,600.