Ontario home garages
Flake floors for tract garages across the city.



Garage floors for Ontario homes from the Euclid Avenue streets to Ontario Ranch, plus warehouse and shop floors near the airport.
★★★★★ 5-Star Rated · 93 reviews on Google, Facebook, Houzz & more
Free on-site estimate
Tell us about the floor and we will call you back to book a visit.
Ontario epoxy flooring costs $6.50 to $18.50 per square foot depending on the system. An epoxy garage floor in Ontario with a two-car flake system of up to 400 sq ft runs $2,600 to $4,000 and is done in one day. Warehouses and industrial floors are quoted after a free site visit.
Our crew comes from Pomona, a short drive east on the 10 or the 60. The estimate happens at your property, whether that is a garage in Ontario Ranch or a tilt-up building near the airport.
Every floor gets diamond grinding, a moisture test and a limited lifetime adhesion warranty on the bond. Permits for additions and tenant improvements go through the City of Ontario. A coating over an existing slab is not a structural change.
Commercial epoxy floor, OntarioOntario has a hot-summer Mediterranean climate with a semi-arid edge, and records run from 118 degrees down to 25. Santa Ana winds hit often in fall and winter. That range is about as tough on a garage floor as Southern California gets.
Heat is the main threat. A slab that stays hot into the night softens cheap epoxy under parked tires, and the coating lifts in patches. A UV-stable polyaspartic topcoat rated for hot-tire pickup holds, and it does not yellow in the sun that pours through an open door.
Wind brings fine dust into every garage and warehouse. A sealed floor stops adding concrete dust to the mix and sweeps clean. For bare warehouse slabs that only need sealing, our grind and seal service is the budget option.
Warehouse floor coating, OntarioOld Route 66 runs through Ontario as Foothill Boulevard, and Euclid Avenue runs north to south through the old part of town. Some older Ontario homes sit near those streets, and their garages often have patched or cracked slabs that a full broadcast flake floor hides well.
Ontario Ranch, south of the 60, is newer, with slabs only a few years old. New concrete can still hold moisture, so we test it before we coat. A newer slab usually needs less crack repair, and a flake or solid color floor goes down on the standard schedule.
If you run a business from home, such as a home shop or a garage gym, tell us at the estimate. We can quote the garage and a separate room on one visit. Check finished rooms on our solid color epoxy page.
Ontario has a hot, dry summer, and a garage that faces west can bake through the afternoon. Hot tires on a cheap coating cause peeling, which is why our floors start with a diamond grind and finish with a polyaspartic topcoat that stays hard in heat. The same build goes into homes near Euclid Avenue and new garages in Ontario Ranch, and it carries the same limited lifetime adhesion warranty. If your garage gets direct sun through an open door, park in the shade for the first week while the topcoat finishes its full cure.
Homes and businesses both make up our Ontario work.
Flake floors for tract garages across the city.
Striped, sealed floors for distribution and storage space.
Floors that shed oil and stand up to jacks and tool carts.
Slip-resistant coatings for backyard slabs in full sun.
Ontario takes its name from the Ontario Model Colony the Chaffey brothers laid out in 1882, with Euclid Avenue and its wide grassy median as the main street. The city incorporated in 1891, and the older streets near Euclid hold homes with small detached garages and aged slabs.
South of the 60, former dairy land is turning into Ontario Ranch, the area once planned as the New Model Colony. Those garages are new, with flat, dense slabs that suit any system once they are ground.
Ontario homes span ZIP codes 91761, 91762 and 91764, along with 91758. Between the airport, logistics and the older industrial blocks, the city also has a large stock of business floors, which we cover on our commercial epoxy flooring page.
Commercial epoxy floor, OntarioEvery card opens the full system page.
Traction for wash bays, loading areas and break rooms.
Quartz systemThis is the flake process, tuned for slabs that bake in Ontario heat.
We read slab moisture and note how much sun the garage door lets in.
A diamond grinder removes the builder finish or old coatings.
Shrinkage cracks common in new tracts get filled and ground smooth.
Two vacuum passes clear dust the wind has carried in.
The moisture-barrier base goes down, timed for the cooler morning hours.
Chips cover the wet base fully, leaving no resin showing.
Cured chips are scraped and the loose ones vacuumed away.
A polyaspartic topcoat finishes it, built to resist sun and hot tires.
The Chaffey brothers bought the land in 1881 along with water rights from Mount San Antonio, and central Ontario incorporated in 1891. Today it is home to Ontario International Airport, the largest employer in the city, and to Ontario Mills, which opened in 1996. The city mixes older neighborhoods and new tracts with a large base of warehouses and shops.
For homes, the work is the same as anywhere: grind, test, repair and coat. For warehouses and shops, we schedule around your hours and pick a system that stands up to forklifts and pallet jacks. Read how that works on our commercial epoxy flooring page.
Older Ontario homes near Euclid Avenue often have detached garages with thin slabs, while newer homes in Ontario Ranch have attached garages with fresh concrete. New slabs still need a diamond grind, since a smooth troweled surface gives the coating little to hold. See finished floors in our gallery.
Typical two-car garage means up to 400 sq ft. Projects start at $2,600. Warehouse and industrial floors are quoted after a free site visit.
| System | Per sq ft | Typical two-car garage (up to 400 sq ft) | Install time |
|---|---|---|---|
| Flake epoxy | $6.50-$10 per sq ft | $2,600-$4,000 | 1 day |
| Solid color epoxy | $9.50-$11.50 per sq ft | $3,800-$4,600 | 3 days |
| Metallic epoxy | $12.50-$18.50 per sq ft | $5,000-$7,400 | 3-4 days |
| Quartz & sand finish | $9-$16.50 per sq ft | $3,600-$6,600 | 2-3 days |
| Grind and seal | $6.50-$9 per sq ft | $2,600-$3,600 | 1-2 days |
| Patio, driveway & pool deck coating | $8-$12 per sq ft | $3,200-$4,800 | 1-2 days |
| Commercial & industrial | Quoted after a free site visit | Quoted after a free site visit | Depends on size and downtime |
Prices and details reviewed November 2026.
Request your Ontario estimate on the contact page or see more in the gallery.
An epoxy garage floor in Ontario costs $2,600 to $4,000 for a two-car flake floor of up to 400 sq ft, done in one day. Solid color comes in at $3,800 to $4,600, and metallic at $5,000 to $7,400.
Yes. Warehouse and industrial floors are quoted after a free site visit, where we measure, test moisture and plan phases around your operations.
Our polyaspartic topcoat is rated for hot-tire pickup and is UV stable, which is why it holds up in Ontario summers that cheap epoxy cannot.
Yes. New slabs are strong and flat. We still diamond grind them, because the smooth builder finish gives a coating nothing to grip.
Yes. We paint aisle lines, safety lanes and hatched zones into the build before the topcoat seals them.
A flake garage takes one day. Solid color takes 3 days, metallic 3-4 days and grind and seal 1-2 days. Warehouses run on a phased schedule.
Coating an existing slab does not need a building permit. Tenant improvements and additions go through the City of Ontario.
All of Ontario, from the Euclid Avenue neighborhoods to Ontario Ranch, plus Upland, Montclair, Chino and Rancho Cucamonga.
Yes. We coat warehouses, shops, showrooms and offices across Ontario. Commercial and industrial floors are quoted after a free site visit, and we schedule around your hours.
Yes. New concrete has a smooth troweled top that coatings cannot grip well. We diamond grind every slab, new or old, and test for moisture before the basecoat.
We also work in these neighboring cities.
We measure, test the concrete for moisture and give you a written price before any work starts. Projects start at $2,600.