Flake epoxy in Montclair
The usual pick for Monte Vista era garages with old patches and oil marks.
Flake epoxy details

Garage floors, patio coatings and shop floors for Montclair homes and businesses, from the old Monte Vista tract to the blocks around Montclair Place.
★★★★★ 5-Star Rated · 93 reviews on Google, Facebook, Houzz & more
Free on-site estimate
Tell us about the floor and we will call you back to book a visit.
A flake garage floor in Montclair runs $2,600 to $4,000 for a two-car space of up to 400 sq ft, and the crew finishes it in a single day. The price covers grinding, crack repair, the basecoat, a full chip broadcast and the topcoat. Compare every system on the garage floor epoxy page.
Montclair began as the Monte Vista tract, surveyed in 1900, and the city incorporated as Monte Vista on April 25, 1956. Questions about permits for additions or garage conversions go to the City of Montclair. A coating over an existing slab needs no permit.
Our base is Pomona, a few miles west of Montclair, so estimates here are quick to book. At the visit we test your slab for moisture, check cracks and show you flake samples under your own garage light.
Flake epoxy floor, MontclairMost of Montclair grew after the Second World War, when the Monte Vista tract filled in with homes. Garages from that era often carry oil stains, hairline cracks and patches from old repairs. A diamond grind takes off the worn top layer before anything goes down.
Through the first half of the 20th century the land here held citrus orchards. Today, detached garages and side yards on older lots are good spots for a flake epoxy floor or a coated walkway.
The San Bernardino Freeway runs through the north end of the city, and road grit rides home on your tires. A polyaspartic topcoat lets that grit sweep off without scratching the chips below.
Every system ends with a UV-stable polyaspartic topcoat, and polyaspartic is a type of polyurea.
The usual pick for Monte Vista era garages with old patches and oil marks.
Flake epoxy detailsA plain gray or white for laundry rooms and home gyms on dry slabs.
Solid color epoxy detailsSwirled color for a converted garage or a bonus room near the mall.
Metallic epoxy detailsTexture for wet utility rooms and the slope at the garage door.
Quartz & sand finish detailsThe Montclair Transit Center links Metrolink, Foothill Transit and Omnitrans, and commuters often want the garage done in one day. A flake floor fits that, since you park on it after 24 hours.
If you work from home instead, a garage office on a sound slab can take solid color epoxy with a satin look. Ask us about a free on-site estimate and we will bring samples of both.
Flake, solid color or metallic epoxy over a ground slab.
Business floors quoted after a free site visit.
In the 2020 census, 54.8% of occupied Montclair homes were owner occupied and 45.2% were rented. If you own a rental, a grind and seal floor gives a clean, low-cost finish between tenants, while a flake floor suits the garage you park in every day.
Landlords and tenants should agree on the work before we book it. We put every area and system on a written quote, so both of you can sign off on the same page. Ready to start? Send the form on our contact page.
A flake garage in Montclair is a one-day job, start to finish.
We meter the slab for moisture and mark cracks from decades of parking.
Diamond grinding opens the surface, and cracks get a polyurea filler.
A tinted basecoat goes down and the crew covers it fully with flake.
The topcoat seals the chips, and you walk on it that evening.
A typical two-car garage in this table means up to 400 sq ft. Montclair projects start at $2,600, and shops and commercial spaces get a written quote after a free site visit.
| System | Per sq ft | Typical two-car garage (up to 400 sq ft) | Install time |
|---|---|---|---|
| Flake epoxy | $6.50-$10 per sq ft | $2,600-$4,000 | 1 day |
| Solid color epoxy | $9.50-$11.50 per sq ft | $3,800-$4,600 | 3 days |
| Metallic epoxy | $12.50-$18.50 per sq ft | $5,000-$7,400 | 3-4 days |
| Quartz & sand finish | $9-$16.50 per sq ft | $3,600-$6,600 | 2-3 days |
| Grind and seal | $6.50-$9 per sq ft | $2,600-$3,600 | 1-2 days |
| Patio, driveway & pool deck coating | $8-$12 per sq ft | $3,200-$4,800 | 1-2 days |
| Commercial & industrial | Quoted after a free site visit | Quoted after a free site visit | Depends on size and downtime |
Prices and details reviewed November 2026.
Want to see the colors first? Browse our color chart.
A two-car flake garage floor in Montclair costs $2,600 to $4,000 for up to 400 sq ft, done in one day. Solid color runs $3,800 to $4,600 over 3 days, and metallic runs $5,000 to $7,400 over 3-4 days.
No. Ping Epoxy Floors is based in Pomona and drives to Montclair for every estimate and install. The estimate is free and happens at your home.
No. Montclair treats a coating on an existing slab as surface work. Additions, conversions and new slabs go through the City of Montclair.
Yes. Grind and seal costs $6.50 to $9 per sq ft and takes 1-2 days, and flake takes one day. Both leave a floor that is easy to clean when the next tenant moves in.
Usually yes. We grind the slab, fill cracks and run a moisture test first. If moisture reads high, we use a moisture-barrier epoxy basecoat.
Yes. Commercial and retail floors in Montclair are quoted after a free site visit, since traffic, chemicals and work hours change the system.
Yes. A Montclair flake garage is done in one day, and you can park on it after 24 hours.
Polyaspartic is a type of polyurea. We use it as the topcoat on every Montclair floor because it is UV stable and resists hot-tire pickup.
Yes. We schedule one-day flake jobs so commuters near the transit center lose only a day of garage use.
All of Montclair is ZIP 91763, and we cover the whole city.
We measure, test the concrete for moisture and give you a written price before any work starts. Projects start at $2,600.