Based in Pomona, CA. Free on-site estimates across the Pomona Valley. Call (909) 699-1776
Ground and sealed concrete in a high bay with skylights, grind and seal concrete floor in Rancho Cucamonga
Clear sealed concrete floor after grind and seal, grind and seal concrete floor in Rancho Cucamonga
Ground and sealed concrete in a bright warehouse corner, grind and seal concrete floor in City of Industry
The concrete look, protected

Grind and Seal Concrete

We diamond grind the slab to fresh concrete and seal it with a clear coat, so it stops dusting and wipes clean while it still looks like concrete.

  • Keeps the natural concrete look
  • Stops concrete dusting
  • Done in 1-2 days
  • Lowest cost per square foot

★★★★★ 5-Star Rated · 93 reviews on Google, Facebook, Houzz & more

Free on-site estimate

Tell us about the floor and we will call you back to book a visit.

Or call (909) 699-1776

Projects from$2,600two-car flake garage, installed
Flake install1 daywalk on it the same night
WarrantyLimited lifetimeadhesion warranty, in writing
EstimateFreeon-site, with a moisture test
Grind and seal pricing

How much does grind and seal cost in Pomona?

Grind and seal in Pomona costs $6.50 to $9 per square foot. A two-car area of up to 400 sq ft runs $2,600 to $3,600, and the job takes 1-2 days. That includes diamond grinding, crack filling and a clear sealer or clear coat.

The lower end covers one grinding pass and a penetrating sealer. The upper end adds a finer grinding pass for a smoother look and a clear film coat with more sheen. Large warehouse floors are priced per square foot after a walkthrough.

For a garage that only needs to stop dusting and resist stains, this is the most affordable way to do it right. Compare it with the other systems in the price table.

Sealed concrete floor under industrial lighting, grind and seal concrete floor in Rancho CucamongaGrind and seal concrete floor, Rancho Cucamonga
What grind and seal is

Fresh concrete, cut open and sealed

Grind and seal starts the same way every coating does: diamond grinding. The grinder removes the weak top layer, old paint, sealers and stains, and exposes clean, hard concrete. A finer pass can smooth the surface and show a little of the stone in the slab.

The crew fills cracks and pits, vacuums, then applies a clear sealer. A penetrating sealer soaks in and hardens the surface without changing its look. A clear film coat sits on top, adds sheen and makes oil easier to wipe off.

The result is a slab that looks like concrete, only cleaner. It stops the fine dust bare concrete sheds, resists oil and water, and is easy to sweep. It does not hide cracks or color changes the way flake epoxy does.

Ground and sealed concrete in a studio space, grind and seal concrete floor in EastvaleGrind and seal concrete floor, Eastvale
Why choose grind and seal

What a ground and sealed slab gives you

Grind and seal suits owners who like the look of concrete and want it protected.

Sealed concrete floor in an open suite, grind and seal concrete floor in EastvaleBudget

Lowest cost per foot

It is the least expensive way to get a professionally prepared, sealed slab.

Ground concrete floor in a workshop with steel posts, grind and seal concrete floor in NorcoDust-free

No more dust

Sealing locks the surface so bare concrete stops shedding powder onto tools and cars.

Sealed concrete with a light gloss in a shop, grind and seal concrete floor in City of IndustryNatural

Industrial look

The concrete stays visible, which suits lofts, warehouses and modern garages.

Sealed concrete floor beside a glass door, grind and seal concrete floor in City of Industry1-2 days

Quick turnaround

Most two-car garages are done in a day or two and back in use right after.

Is your slab a candidate

How to tell if your slab suits grind and seal

Grind and seal shows the concrete as it is, so the slab has to look good to you once the top layer comes off. Slabs with few patches, little staining and an even color make the best candidates. Newer slabs in Ontario Ranch and The Preserve in Chino can be good candidates.

Grinding can expose small stones and sand in the concrete, called aggregate. A light grind leaves a cream look with little stone showing. A deeper grind shows more stone and costs more labor. At the estimate we look at the slab with you and talk through how much stone a grind will likely expose.

Old paint, glue from carpet or tile, and deep oil stains do not always grind out. If we expect them to stay visible, we will tell you, and you can switch to a coating that covers them. Book the visit through our contact page, and we will bring samples of both.

Grind and seal is also a good first step if you are not sure yet. A sealed slab can take a full coating later, since the crew grinds it again before the basecoat. You can seal a shop now and add flake once the space is finished, on a home in San Dimas or a hillside lot in Diamond Bar. For wet areas, ask about a quartz & sand finish, which adds texture over the same base.

Sealed concrete floor in an open suite, grind and seal concrete floor in EastvaleGrind and seal concrete floor, Eastvale
Install schedule

How grind and seal runs over 1-2 days

On a garage, the crew grinds, fills cracks and vacuums in the morning, then applies the sealer in the afternoon. A penetrating sealer is dry to walk on in a few hours. A clear film coat needs overnight cure before foot traffic and about 24 hours before you drive on it.

Warehouses and large shops take longer because of the area, and we can work in sections so part of the floor stays in use.

If you later want color, a ground and sealed slab can still get a flake or solid coating, though the sealer has to be ground off first. Our garage floor epoxy guide helps you decide now.

Sealed gray concrete in a warehouse aisle, grind and seal concrete floor in Rancho CucamongaGrind and seal concrete floor, Rancho Cucamonga
Is grind and seal right for you

When grind and seal is the right call

Grind and seal works best on slabs in fair shape that you like the look of. It is a good fit for warehouses, storage units, workshops and garages where function matters more than color.

It is not the right choice for a slab with heavy staining or many patches, because those stay visible. It also offers a thinner wear layer than a coating, so very heavy traffic will wear through the sealer sooner and need a reseal.

Many Pomona industrial suites along the 10 and 60 corridors have bare slabs that dust and stain. For those, grind and seal is often the first step, and our commercial epoxy flooring page covers the heavier systems.

Sealed concrete in an unfinished commercial space, grind and seal concrete floor in City of IndustryGrind and seal concrete floor, City of Industry
Grind and seal versus coatings

Grind and seal compared with flake, quartz and paint

Against paint, grind and seal lasts far longer because nothing sits on the surface to peel. Against flake, it costs less but hides nothing and wears thinner. Against quartz & sand finish, it is smoother and has no built-in grip.

Against solid color epoxy, it keeps the concrete look and skips two days of coats.

If you are unsure, start with the estimate. We grind a small test patch so you can see what your slab looks like ground and sealed before you choose.

Sealed concrete with a satin sheen by a roll-up door, grind and seal concrete floor in City of IndustryGrind and seal concrete floor, City of Industry
What the sealer does

How the sealer protects a ground slab

After grinding, the slab is open and thirsty. The sealer soaks into the top of the concrete and hardens there, which locks down dust and slows how fast oil and water soak in. You get a satin or light gloss look with the concrete still visible.

Penetrating sealers leave the surface looking close to bare concrete and need the least care. Film forming sealers sit on top and give more shine, and they wear in traffic lanes sooner. We pick the sealer with you based on how the floor gets used and how much shine you want.

Grind and seal suits a slab you like the look of. If your concrete has stains, patches or old paint you want hidden, a flake epoxy floor covers it for a similar price. You can compare both systems in our gallery.

Sealed concrete with a satin sheen by a roll-up door, grind and seal concrete floor in City of IndustryGrind and seal concrete floor, City of Industry
Keeping it sealed

When to reseal and how to clean a sealed floor

A sealed slab is the easiest floor here to clean. Dust mop it, and wash with water and a neutral cleaner. Skip acid and strong degreasers, since they eat into the sealer.

Plan on a fresh sealer coat every few years in a busy shop or garage, sooner in a lane where forklifts or cars turn. The floor tells you: when water stops beading and starts darkening the concrete, it is time. Resealing needs no new grinding.

Grind and seal costs $6.50 to $9 per sq ft, or $2,600 to $3,600 for a two-car garage of up to 400 sq ft, done in 1-2 days. It suits workshops in Chino, warehouse floors in Ontario and homes in Claremont where you like the look of plain concrete.

Sealed concrete with a light gloss in a shop, grind and seal concrete floor in City of IndustryGrind and seal concrete floor, City of Industry
Grind and seal prices

Grind and seal prices next to flake and quartz

Typical two-car area means up to 400 sq ft. Projects start at $2,600.

SystemPer sq ftTypical two-car garage (up to 400 sq ft)Install time
Grind and seal$6.50-$9 per sq ft$2,600-$3,6001-2 days
Flake epoxy$6.50-$10 per sq ft$2,600-$4,0001 day
Quartz & sand finish$9-$16.50 per sq ft$3,600-$6,6002-3 days

Prices and details reviewed November 2026.

Request a test patch through the contact page.

Sealed floors

Ground and sealed concrete floors

Tap a photo to see it full size.

Related pages

Other systems and pages

Compare before you decide.

Grind and seal questions

Questions about grind and seal

How much does grind and seal cost in Pomona?

Grind and seal costs $6.50 to $9 per sq ft. A two-car area of up to 400 sq ft runs $2,600 to $3,600, done in 1-2 days, including diamond grinding, crack filling and a clear sealer or clear coat.

Is grind and seal the same as polished concrete?

No. Polished concrete uses many grinding passes and a densifier to build a high shine. Grind and seal uses one or two passes and a sealer, which costs less and still protects the slab.

Will grind and seal hide stains?

Grinding removes surface stains, and deep oil stains often lighten. Stains that go deep into the slab and old patches stay visible. A flake coating hides them if that matters to you.

How long does a sealer last?

A penetrating sealer in a garage lasts years and can be renewed with a cleaning and a fresh coat. A clear film coat lasts longer in traffic but wears in tire paths over time.

Can I add color later?

Yes. The sealer has to be ground off first, then the slab can take a flake, solid or metallic system.

Is grind and seal good for a warehouse?

Yes, for warehouses that want a clean, dust-free slab without color. Large floors are priced per square foot after a walkthrough.

Does grind and seal make the floor slippery?

A penetrating sealer leaves the texture close to bare concrete. A gloss film coat is smoother, and we can add an anti-slip additive.

How soon can I use the floor?

A penetrating sealer is walkable in a few hours. A clear film coat needs overnight cure for foot traffic and about 24 hours for cars.

Free on-site estimate

Ready to see your slab coated?

We measure, test the concrete for moisture and give you a written price before any work starts. Projects start at $2,600.