Flake epoxy in Claremont
Hides the cracks in older Village garage slabs and goes down in a single day.
Flake details

Garage floors, patios and interior floors for Claremont homes, from tree-lined streets near the Colleges to the foothill neighborhoods above Base Line Road.
★★★★★ 5-Star Rated · 93 reviews on Google, Facebook, Houzz & more
Free on-site estimate
Tell us about the floor and we will call you back to book a visit.
Epoxy flooring in Claremont starts at $2,600, and a two-car flake garage of up to 400 sq ft runs $2,600 to $4,000, installed in one day. That price covers diamond grinding, crack repair, a moisture-barrier basecoat, a full flake broadcast and a polyaspartic topcoat.
Ping Epoxy Floors comes up from Pomona, a few minutes south on Indian Hill Boulevard and Towne Avenue. The estimate happens in your garage, where we can test the slab and see the light.
Claremont homeowners tend to ask the same careful questions: what the coating is made of, how the slab gets prepared and what the warranty covers. Our answer starts with the grind. Every floor gets diamond grinding to the profile the coating maker specifies, and every floor carries a limited lifetime adhesion warranty. Permits for additions or ADUs run through the City of Claremont, and a coating over an existing slab needs none.
Epoxy flooring, ClaremontClaremont was incorporated in 1907, and the streets around the Village and the Colleges still hold early 20th century homes with detached garages. Those garages often have thin slabs, old paint and settling cracks, and they get the most from a full grind and a flake broadcast that hides repairs.
North of Foothill Boulevard, former citrus groves gave way to larger homes, and the hillside areas of Padua Hills and Claraboya tend to have larger garages and newer slabs. Newer concrete is smoother and harder, so it still needs grinding before any coating can grip.
The whole city shares one ZIP code, 91711. Faculty homes near the Claremont Colleges often turn a garage into a studio or workshop, which suits a solid color epoxy floor or a metallic epoxy finish on a dry slab.
Garages get flake most often, since it hides leaf grit and tire marks. If your detached garage doubles as a studio or workshop, a solid color floor gives that space a clean, bright look that is easy to sweep.
Covered patios and pool decks get our outdoor system with a light blend. Fall Santa Ana winds blow dust and leaves onto patios, and a coated surface rinses off with a hose. Rooms inside the house, like a home office or a sunroom on a slab, suit metallic or solid color once the slab passes a moisture test.
Claremont summers run hot and dry, and snow is rare in town, though you can see it on the San Gabriel Mountains in winter. Your slab sees heat more than cold, so the topcoat matters most. Every floor we install here gets a UV-stable polyaspartic topcoat.
Each system links to its own page with prices and photos. Polyaspartic, a type of polyurea, tops all four.
Hides the cracks in older Village garage slabs and goes down in a single day.
Flake detailsA clean gray or white for studios and workshops on sound, dry concrete.
Solid color detailsHand-worked swirls for converted garages and slab-on-grade rooms.
Metallic detailsGrip for sloped garage aprons and wet laundry rooms in the foothills.
Quartz detailsClaremont climbs from about 1,100 feet near the Village to the edge of the San Gabriel Mountains, and summer days can top 100 degrees. Garages that face west soak up afternoon heat, and a hot slab is where cheap epoxy fails first, softening under tires and peeling.
Fall Santa Ana winds bring dust, leaves and sometimes ash down from the foothills, and those winds raise fire danger in the foothill areas. A sealed floor or patio hoses clean after a wind event instead of holding ash in its pores.
Late spring brings May Gray and June Gloom, with cool, damp mornings. That swing in humidity is one reason we read the moisture in every slab before choosing a basecoat, and why we steer damp slabs toward flake epoxy rather than solid color.
Flake epoxy floor, ClaremontMost jobs start in the garage and spread to the patio.
Older detached garages behind Village homes, ground and coated in flake.
Slip-resistant coatings for backyard slabs in full foothill sun.
Smooth floors for converted garages used as studios.
Business floors near the Village, quoted after a visit.
Here is the flake process we use in Claremont garages. It finishes in one visit.
The crew checks the slab with a moisture meter, since many older Claremont garages lack a vapor barrier.
Diamond grinding takes off decades of paint and oil to reach hard concrete.
Settling cracks common in older detached garages get filled and ground level.
Grinding dust is pulled out so the basecoat bonds to concrete.
A moisture-barrier epoxy basecoat goes down in a tint matched to your chips.
Flake is thrown by hand until the base disappears under the chips.
The cured base is scraped and vacuumed so the surface feels even.
Polyaspartic seals the floor, and you can walk on it before dinner.
Claremont has planted street trees since it incorporated in 1907, and it has won the Tree City USA award for 22 years in a row. Those trees drop leaves, sap and pollen onto driveways all year, and you track it into the garage. A full broadcast flake floor hides that grit between sweeps, and a polyaspartic topcoat lets sap wipe off.
Roots from big street trees can heave a driveway apron and crack the garage slab near the door. We check for lifted edges at the estimate. Small cracks get filled before coating, and a lifted edge may need a concrete contractor first, which we tell you up front.
About 63.6% of occupied homes in Claremont are owner occupied, per the 2020 census, and many owners stay for years, so a floor built to last pays off. Compare blends on our color chart before the visit.
Typical two-car garage means up to 400 sq ft. Every project starts at $2,600, and commercial floors are quoted after a free site visit.
| System | Per sq ft | Typical two-car garage (up to 400 sq ft) | Install time |
|---|---|---|---|
| Flake epoxy | $6.50-$10 per sq ft | $2,600-$4,000 | 1 day |
| Solid color epoxy | $9.50-$11.50 per sq ft | $3,800-$4,600 | 3 days |
| Metallic epoxy | $12.50-$18.50 per sq ft | $5,000-$7,400 | 3-4 days |
| Quartz & sand finish | $9-$16.50 per sq ft | $3,600-$6,600 | 2-3 days |
| Grind and seal | $6.50-$9 per sq ft | $2,600-$3,600 | 1-2 days |
| Patio, driveway & pool deck coating | $8-$12 per sq ft | $3,200-$4,800 | 1-2 days |
| Commercial & industrial | Quoted after a free site visit | Quoted after a free site visit | Depends on size and downtime |
Prices and details reviewed November 2026.
Book a free Claremont estimate through our contact page, or browse more floors in the gallery.
An epoxy garage floor in Claremont costs $2,600 to $4,000 for a two-car flake system of up to 400 sq ft, installed in one day. Solid color costs $3,800 to $4,600, and metallic costs $5,000 to $7,400. Every project starts at $2,600.
Yes. Older detached garages usually need more grinding to remove paint and more crack repair, and flake hides those repairs best. We note the extra prep at the estimate so the price has no surprises.
Yes. We finish every floor with a UV-stable polyaspartic topcoat rated for hot-tire pickup, which holds up in Claremont summers that can top 100 degrees.
A coating over an existing slab does not change the structure. Garage conversions, ADUs and additions go through the City of Claremont, and we can coat the slab once that work is done.
Yes. Patio and pool deck coating runs $8 to $12 per sq ft and takes 1-2 days, with a slip-resistant texture and light colors that stay cooler in sun.
You can walk on a flake floor the evening it goes in and park after 24 hours. Solid color and metallic take 3 to 4 days in total.
We test every slab. If the reading is high, we use a moisture-barrier basecoat and recommend flake, which tolerates moisture far better than solid or metallic finishes.
All of Claremont is ZIP 91711, from the Village to Padua Hills, and we also work in nearby La Verne, Upland, Montclair and Pomona.
Yes. We coat garages, carports and patios across Claremont, including the Village, the streets near the Colleges, Padua Hills and Claraboya.
Yes. Sap, leaves and pollen sit on top of a polyaspartic topcoat and wipe off with water and a mild cleaner. Flake floors hide leaf grit between sweeps better than solid colors.
We measure, test the concrete for moisture and give you a written price before any work starts. Projects start at $2,600.