Garages in Norco
Flake that hides dust and mud.


Garage floors, tack room floors and patio coatings for Norco homes on horse-friendly lots.
★★★★★ 5-Star Rated · 93 reviews on Google, Facebook, Houzz & more
Free on-site estimate
Tell us about the floor and we will call you back to book a visit.
A Norco flake garage of up to 400 sq ft costs $2,600 to $4,000 and takes one day. Tack rooms and wash areas often suit a quartz & sand finish, at $9 to $16.50 per sq ft.
Norco held its grand opening on May 13, 1923, and incorporated on December 28, 1964. Permit questions go to the City of Norco.
We are based in Pomona and come to Norco for every free estimate.
Flake garage floor, NorcoNorco had 26,316 residents in the 2020 census, and 81.8% of occupied homes were owner occupied. Owners often coat the garage and the patio on the same visit.
A flake epoxy floor suits the garage, and an outdoor concrete coating suits patios and walks.
Flake that hides dust and mud.
Quartz with a textured topcoat.
Grind and seal for dust control.
Cooler outdoor blends.
Norco has horse trails in place of many sidewalks, and hitching rails sit near businesses. Since 2017, Circle D Ranch in Norco has housed horses for Disneyland.
A patio coating with grip also suits the walkway from the house to the barn. See all outdoor options on our outdoor concrete coatings page.
Metrolink riders use the Corona-North Main station nearby, and Norco contracts with the Riverside County Sheriff for police service from a station on Clark Avenue. Busy owners here often want the garage, barn aisle and walkway coated in one trip, and we can quote all three at one visit.
Garages take one day, and barns get a plan set at the estimate.
We look at each floor and how it is used.
Each slab is opened to bare concrete.
Flake, quartz or grind and seal goes down.
The topcoat cures before use.
Norco calls itself "Horsetown, USA," and the city has horse trails in place of many sidewalks. Barns, tack rooms and wash areas on horse properties see water, mud, hooves and tools.
A textured quartz & sand finish gives grip in wash areas, and a grind and seal finish keeps barn dust down.
Interstate 15 runs through the middle of town, and summers are hot and dry. Outdoor work gets a UV-stable polyaspartic topcoat.
Every floor gets a UV-stable polyaspartic topcoat.
A clean color for tack room walls and offices.
Solid color epoxy detailsTexture for wash areas and barn aisles.
Quartz & sand finish detailsThe table assumes a typical two-car garage of up to 400 sq ft. Norco projects start at $2,600, and commercial floors are quoted after a free site visit.
| System | Per sq ft | Typical two-car garage (up to 400 sq ft) | Install time |
|---|---|---|---|
| Flake epoxy | $6.50-$10 per sq ft | $2,600-$4,000 | 1 day |
| Solid color epoxy | $9.50-$11.50 per sq ft | $3,800-$4,600 | 3 days |
| Metallic epoxy | $12.50-$18.50 per sq ft | $5,000-$7,400 | 3-4 days |
| Quartz & sand finish | $9-$16.50 per sq ft | $3,600-$6,600 | 2-3 days |
| Grind and seal | $6.50-$9 per sq ft | $2,600-$3,600 | 1-2 days |
| Patio, driveway & pool deck coating | $8-$12 per sq ft | $3,200-$4,800 | 1-2 days |
| Commercial & industrial | Quoted after a free site visit | Quoted after a free site visit | Depends on size and downtime |
Prices and details reviewed November 2026.
Compare colors on our color chart.
A flake garage floor in Norco costs $2,600 to $4,000 for two cars and up to 400 sq ft, done in one day.
Yes. A quartz and sand finish gives grip on wet floors and costs $9 to $16.50 per sq ft.
No. We are based in Pomona and serve Norco with free on-site estimates.
We look at each barn floor at the estimate and recommend grind and seal or quartz based on use.
A Norco patio costs $8 to $12 per sq ft to coat and takes 1-2 days.
Norco floors carry a limited lifetime adhesion warranty, and the terms are in writing.
Yes, on a ground slab with a polyaspartic topcoat.
Norco is ZIP 92860.
Yes. A Norco walkway to the barn costs $8 to $12 per sq ft to coat, and we add texture so boots keep their grip when it is wet.
Yes. Grind and seal keeps dust down in a barn aisle and costs $6.50 to $9 per sq ft. Wash areas usually do better with quartz for extra grip.
We also coat floors in these nearby cities.
We measure, test the concrete for moisture and give you a written price before any work starts. Projects start at $2,600.