Hillside garages in Walnut
Flake floors with extra grip at the door.


Garage floors and outdoor coatings for Walnut homes between the San Jose Hills and the Puente Hills.
★★★★★ 5-Star Rated · 93 reviews on Google, Facebook, Houzz & more
Free on-site estimate
Tell us about the floor and we will call you back to book a visit.
Walnut epoxy flooring costs $6.50 to $18.50 per square foot depending on the system. A two-car flake garage of up to 400 sq ft lands between $2,600 and $4,000 and takes one day. The limited lifetime adhesion warranty comes in writing.
Walnut incorporated on January 19, 1959, and takes its name from the Rancho Los Nogales land grant, nogales being Spanish for walnut trees. Permit questions for additions go to the City of Walnut.
We come from Pomona, east of Walnut, for every estimate. You get a moisture test, a look at the cracks and a written price. Compare the options on our solid color epoxy and flake epoxy pages before the visit.
Solid color epoxy floor, WalnutFlake floors with extra grip at the door.
Cooler, slip-resistant coatings for sunny lots.
Metallic or solid color over a dry slab.
Each system links to a full page. All four finish with a UV-stable polyaspartic topcoat.
The go-to for Walnut garages, with chips that cover hairline cracks.
Flake epoxy detailsA crisp single color for gyms and offices on level slabs.
Solid color epoxy detailsPearl swirls for a game room or office in a Walnut home.
Metallic epoxy detailsA gritty finish for the slope where the driveway meets the garage.
Quartz & sand finish detailsThe Walnut Valley sits between the steep San Jose Hills to the north and the gently sloping Puente Hills to the south. Homes climb both sides, so some garages and driveway aprons slope toward the street.
On a sloped apron, the topcoat gets more texture so tires and shoes keep their grip after rain. Inside the garage, a full broadcast flake floor hides the dust that blows off dry hillsides in fall.
Patios on a hillside lot often get full afternoon sun. Our outdoor concrete coatings use a UV-stable polyaspartic topcoat, which holds its color where plain epoxy would yellow.
Solid color epoxy floor, WalnutA Walnut flake floor is finished in one working day.
We note where water runs on a hillside slab and plan texture there.
Diamond tooling opens the concrete so the base can bite.
The base goes down, then a full broadcast of chips.
The topcoat seals everything, with added grip at the door.
Mt. San Antonio College sits in Walnut. If your garage doubles as a study room or home office, a metallic or solid color floor turns it into a finished room.
For a lower cost option, ask about grind and seal, a form of concrete resurfacing that leaves a dust-free, cleanable slab. We price every option at your free on-site estimate.
In the 2020 census, 83.0% of occupied Walnut homes were owner occupied, one of the highest shares in the area. With 28,430 residents, Walnut is a quiet, residential city where owners tend to invest in the house they plan to keep.
That is why a metallic epoxy floor in a game room, or a flake garage floor that lasts, fits so many Walnut homes. Browse finished floors in our gallery.
These prices assume a typical two-car garage of up to 400 sq ft. Walnut projects start at $2,600, and business floors are quoted after a free site visit.
| System | Per sq ft | Typical two-car garage (up to 400 sq ft) | Install time |
|---|---|---|---|
| Flake epoxy | $6.50-$10 per sq ft | $2,600-$4,000 | 1 day |
| Solid color epoxy | $9.50-$11.50 per sq ft | $3,800-$4,600 | 3 days |
| Metallic epoxy | $12.50-$18.50 per sq ft | $5,000-$7,400 | 3-4 days |
| Quartz & sand finish | $9-$16.50 per sq ft | $3,600-$6,600 | 2-3 days |
| Grind and seal | $6.50-$9 per sq ft | $2,600-$3,600 | 1-2 days |
| Patio, driveway & pool deck coating | $8-$12 per sq ft | $3,200-$4,800 | 1-2 days |
| Commercial & industrial | Quoted after a free site visit | Quoted after a free site visit | Depends on size and downtime |
Prices and details reviewed November 2026.
Ready to book? Use the form on our contact page.
A flake garage floor in Walnut costs $2,600 to $4,000 for a two-car space of up to 400 sq ft. A grind and seal finish costs $2,600 to $3,600.
We are based in Pomona, a short drive east of Walnut. We are a service-area business, so the estimate happens at your Walnut home.
Yes. We coat aprons and set a textured topcoat on the slope for grip in wet weather. Outdoor work costs $8 to $12 per sq ft.
Yes, if the slab passes a moisture test. Metallic runs $12.50 to $18.50 per sq ft, and the install takes 3-4 days.
One day. The crew grinds, repairs, lays the basecoat and flake, and seals it the same day. Park after 24 hours.
A limited lifetime adhesion warranty, which covers the bond between the coating and your slab. You get the terms in writing at the estimate.
For most Walnut garages, yes. Flake hides cracks and dust, and we add grip at the door on sloped slabs.
Yes. Solid color and metallic both suit garage offices on dry slabs in Walnut.
We cover 91788, 91789 and 91795.
Yes. It grinds the top of the slab and seals it, which leaves a clean, dust-free surface for $6.50 to $9 per sq ft.
We also coat floors in these neighboring areas.
We measure, test the concrete for moisture and give you a written price before any work starts. Projects start at $2,600.