Based in Pomona, CA. Free on-site estimates across the Pomona Valley. Call (909) 699-1776
Close view of gray, white and gold metallic swirls, metallic epoxy floor in Pomona
Gray and gold metallic epoxy floor near a staircase, metallic epoxy floor in Pomona
Gold, gray and black metallic epoxy floor in an empty room, metallic epoxy floor in Pomona
Hand-worked showpiece floors

Metallic Epoxy Flooring

Metallic pigments moved through clear resin by hand, so every floor carries its own pattern of depth and light.

  • Custom color combinations
  • No two floors alike
  • Installed in 3-4 days
  • Limited lifetime adhesion warranty

★★★★★ 5-Star Rated · 93 reviews on Google, Facebook, Houzz & more

Free on-site estimate

Tell us about the floor and we will call you back to book a visit.

Or call (909) 699-1776

Projects from$2,600two-car flake garage, installed
Flake install1 daywalk on it the same night
WarrantyLimited lifetimeadhesion warranty, in writing
EstimateFreeon-site, with a moisture test
Metallic pricing

How much does a metallic epoxy floor cost in Pomona?

A metallic epoxy floor in Pomona costs $12.50 to $18.50 per square foot. For a two-car area of up to 400 sq ft that comes to $5,000 to $7,400, installed over 3-4 days with grinding, repairs, a tinted base, the metallic layer and a polyaspartic topcoat.

Price inside that range follows the design. One metallic color worked in soft drifts sits near the low end. Two or three colors with veins, lacing or a marble look take more hands and more time, and land near the top.

Living rooms and showrooms are priced per square foot from the same rate. The price table shows metallic next to solid color and flake.

Gray, white and gold metallic epoxy floor swirls, metallic epoxy floor in PomonaMetallic epoxy floor, Pomona
What metallic is

Pearl pigments, clear resin and a crew working fast

A metallic floor starts like any other: diamond grinding, repairs and a tinted epoxy base coat that sets the background color. Then the crew mixes metallic pigments into a clear epoxy and pours it, working it across the floor with rollers, trowels, sprayers and brushes before it starts to set.

The pigments are fine pearl particles that catch light differently depending on which way they lie. Moving them creates the depth, swirls and veins that make each floor one of a kind. The crew has a working window measured in minutes, so the pattern comes from practice and speed.

A clear UV-stable polyaspartic topcoat protects the design. Without it the metallic layer would scratch and dull. Some owners add a satin topcoat to cut glare, and we bring samples of both sheens.

White metallic epoxy floor with soft gray drifts, metallic epoxy floor in Yorba LindaMetallic epoxy floor, Yorba Linda
Where metallic belongs

What a metallic floor is best at

Metallic is a design choice first. It suits rooms where people stop and look at the floor.

White and gray metallic epoxy floor in a furnished living room, metallic epoxy floor in La PuenteInterior

Living rooms and studios

A metallic floor turns a slab-on-grade living room or a garage conversion into a finished room.

Black and silver metallic epoxy floor in a long commercial space, metallic epoxy floor in AzusaCommercial

Showrooms and salons

Retail and salon floors use metallic to give a space its own look and an easy surface to clean.

Dark gray metallic epoxy floor in a home office, metallic epoxy floor in La HabraShow garage

Show garages

A collector garage with a metallic floor reads like a showroom when the door goes up.

Black and silver metallic epoxy floor in a tiled room, metallic epoxy floor in Baldwin ParkCustom

Custom colors

Gray, white and gold, charcoal and silver, or the colors you bring, mixed for your room.

Is metallic worth the price

When a metallic floor earns its higher price

Metallic is our most expensive system at $12.50 to $18.50 per sq ft, or $5,000 to $7,400 for a two-car garage of up to 400 sq ft. It takes 3-4 days. The price reflects extra prep, extra material and a crew that has to work the resin by hand while it flows. We install it in homes and showrooms from Ontario to Pomona.

It earns that price in rooms people see. Living rooms, home offices, bars, showrooms and salons get the most from it, since visitors notice the floor. We coat those rooms in homes from Claremont to La Verne. A garage can be a fit if you use it as a showroom for a car or a bike, though flake handles daily parking with less upkeep.

If you love the look but the price is a stretch, coat the room people see in metallic and the garage in flake. You can mix systems on the same visit. Ask for both on one quote, and compare flake blends on our color chart before the visit.

Light gray metallic floor in an empty suite, metallic epoxy floor in CovinaMetallic epoxy floor, Covina
Install schedule

What happens over the 3-4 day install

Day one covers grinding, repairs and the tinted base coat. Day two is the metallic pour, which needs a calm room: no fans blowing dust, no pets and no foot traffic until it sets. Day three or four is the polyaspartic topcoat.

You can walk on the floor in socks the day after the topcoat. Furniture can come back after about 3 days, with felt pads on the legs. Rugs should wait a week so the topcoat can finish curing.

For interior rooms we tape and cover walls and baseboards and plan the work so dust from grinding is contained. If you want a faster job in a working garage, flake epoxy goes down in one day.

White and gray metallic epoxy floor down a hallway, metallic epoxy floor in Yorba LindaMetallic epoxy floor, Yorba Linda
Slab check

Does your slab suit a metallic floor

Metallic floors need dry, sound concrete. Moisture under a clear metallic layer can cloud it or raise blisters, and cracks can telegraph into the design. We moisture test every slab before we quote metallic.

Older Pomona homes on raised foundations do not have a slab inside, so metallic fits garages, converted garages, additions and newer slab-on-grade rooms. In a commercial suite, we check the slab for old adhesive and tile mastic, which has to come off completely.

If the moisture reading is high or the floor has a lot of damage, we recommend flake or quartz & sand finish instead. You will hear that at the estimate, before you spend anything.

Dark taupe metallic floor in an open room, metallic epoxy floor in CovinaMetallic epoxy floor, Covina
Metallic versus other floors

Metallic compared with tile, wood and other coatings

Against tile, a metallic floor has no grout lines to clean and no tiles to crack. Against wood or vinyl plank, it shrugs off water and pet accidents. It does scratch under grit and dragged furniture, and the topcoat can be renewed when that happens.

Against solid color epoxy, metallic costs more and takes longer, and it gives a room a finish no paint or plain coating can match. Against flake, it is the showpiece and flake is the workhorse.

For business floors with heavy traffic, our commercial epoxy flooring page explains when metallic fits a salon or showroom and when a harder-wearing system is the better buy.

White marble look metallic floor in a hallway, metallic epoxy floor in Diamond BarMetallic epoxy floor, Diamond Bar
Designing the look

How we plan the pattern on a metallic floor

Every metallic floor starts with three choices: the base color, one or two accent pigments and how much movement you want. Soft drifts look calm in a bedroom or office. Wide swirls with gold or copper look bold in a bar room, a showroom or a large garage.

We bring sample boards to the estimate and show you how the same pigments look under warm and cool light. The pattern on your floor will differ from the board, since the crew works the resin by hand while it flows. That is the part owners like most.

If you want a calmer floor with no swirl, a solid color system gives you one clean color for less. If you want texture and grip in a room that gets wet, look at quartz instead. You can see more finished metallic rooms in our gallery.

Black and silver metallic epoxy floor in a tiled room, metallic epoxy floor in Baldwin ParkMetallic epoxy floor, Baldwin Park
Living with a metallic floor

Daily care and what to keep off a metallic floor

A metallic floor wears like any other topcoated epoxy floor. Sweep grit off often, since sand under shoes dulls a gloss finish faster than anything else. Use felt pads under chair and table legs, and wash with plain warm water or a pH neutral cleaner.

Put mats inside every outside door. Pomona Valley dust blows in on windy days, and a mat catches most of it before it reaches the floor. In a garage, keep a drip tray under the car if it leaks oil.

High gloss shows scuffs sooner than a duller finish, and rooms with big west windows show glare in the afternoon. Draw the blinds or add a rug where the sun hits hardest. We install metallic floors in homes across Diamond Bar and San Dimas with the same 3-4 day schedule.

Dark taupe metallic floor in an open room, metallic epoxy floor in CovinaMetallic epoxy floor, Covina
Metallic prices

Metallic prices next to solid color and flake

Typical two-car area means up to 400 sq ft. Projects start at $2,600, and metallic sits at the top of the residential range.

SystemPer sq ftTypical two-car garage (up to 400 sq ft)Install time
Metallic epoxy$12.50-$18.50 per sq ft$5,000-$7,4003-4 days
Solid color epoxy$9.50-$11.50 per sq ft$3,800-$4,6003 days
Flake epoxy$6.50-$10 per sq ft$2,600-$4,0001 day

Prices and details reviewed November 2026.

Send photos of your room with the estimate form and we will call to talk through colors.

Metallic floors

Metallic floors with their own patterns

Tap a photo to see the full floor.

Other finishes

Compare metallic with other systems

Each page lists prices and install times.

Metallic questions

Questions about metallic epoxy floors

How much does a metallic epoxy floor cost in Pomona?

A metallic floor costs $12.50 to $18.50 per sq ft. A two-car area of up to 400 sq ft runs $5,000 to $7,400 installed over 3-4 days, including grinding, repairs, the tinted base, the metallic layer and a polyaspartic topcoat.

Can I choose the colors and pattern?

You choose the colors and the style, such as soft drifts, veins or a marble look. The exact pattern forms as the crew works the pigments, so no two floors match, and that is the appeal.

Is a metallic floor slippery?

A gloss metallic floor is smooth and gets slick when wet, like polished stone. We can add a fine anti-slip additive to the topcoat, and a satin sheen cuts glare as well.

Does metallic epoxy scratch?

It can scratch under grit and dragged furniture, and scratches show more on dark colors. Felt pads, door mats and regular dust mopping prevent most of it, and the topcoat can be renewed later.

Can metallic go in a living room?

Yes, on a dry concrete slab. We moisture test first. Homes on raised wood floors need a different flooring, since metallic epoxy goes over concrete.

How long does a metallic floor take?

Plan on 3-4 days: prep and base, the metallic pour, then the topcoat. Furniture can go back after about 3 days and rugs after a week.

Will the floor yellow in the sun?

Epoxy alone can amber in UV light. We seal every metallic floor with a UV-stable polyaspartic topcoat, which holds its clarity in sunny rooms and garages.

How do I clean a metallic floor?

Dust mop daily and wash with warm water and a pH-neutral cleaner. Avoid vinegar, ammonia and abrasive pads, which dull the topcoat over time.

Free on-site estimate

Ready to see your slab coated?

We measure, test the concrete for moisture and give you a written price before any work starts. Projects start at $2,600.