Based in Pomona, CA. Free on-site estimates across the Pomona Valley. Call (909) 699-1776
Light flake pool deck coating around a backyard pool, outdoor concrete coating in Glendora
Light flake coating on a covered side patio, outdoor concrete coating in La Verne
Coated backyard patio around a fire pit and spa, outdoor concrete coating in Charter Oak
Outdoor concrete coatings

Patio, Driveway & Pool Deck Coatings

A UV-stable polyaspartic system with a slip-resistant finish, built for Pomona sun on patios, walkways, driveways and pool decks.

  • Slip-resistant texture
  • Will not yellow in sun
  • Done in 1-2 days
  • Limited lifetime adhesion warranty

★★★★★ 5-Star Rated · 93 reviews on Google, Facebook, Houzz & more

Free on-site estimate

Tell us about the floor and we will call you back to book a visit.

Or call (909) 699-1776

Projects from$2,600two-car flake garage, installed
Flake install1 daywalk on it the same night
WarrantyLimited lifetimeadhesion warranty, in writing
EstimateFreeon-site, with a moisture test
Outdoor pricing

How much does a patio or pool deck coating cost in Pomona?

Patio, driveway and pool deck coating in Pomona costs $8 to $12 per square foot. A 400 sq ft area lands between $3,200 and $4,800, and the job takes 1-2 days, including grinding, crack repair, the basecoat, a decorative broadcast and a slip-resistant polyaspartic topcoat.

Concrete resurfacing usually means pouring a new overlay. We coat the existing slab instead, which keeps the job to a day or two and costs less than tearing out and repouring.

Pool decks with coping, steps and drains take more detail work than a flat patio, so they sit higher in the range. The price table shows outdoor next to garage systems.

Coated concrete side yard walkway with a light flake finish, outdoor concrete coating in La VerneOutdoor concrete coating, La Verne
How outdoor coating differs

Made for sun, water and bare feet

Outdoor concrete takes more abuse than a garage floor. In Pomona it bakes in summer sun, gets splashed by pools and sprinklers, and sees bare feet. A coating that works indoors can yellow, soften or turn slick outside.

Our outdoor system uses a UV-stable polyaspartic topcoat that holds its color in full sun, over a basecoat with a fine flake or sand broadcast. The broadcast and a textured topcoat give the surface grip when wet. Light blends stay cooler underfoot than dark ones.

Prep is the same as indoors: diamond grinding to open the surface, crack repair, and cleaning out the dirt and efflorescence that outdoor slabs collect. Expansion joints are kept open so the slab can move with the seasons.

Flake coated walkway leading to a gazebo, outdoor concrete coating in La VerneOutdoor concrete coating, La Verne
What gets coated

Outdoor areas we coat

Each area has its own needs, and we match the texture and color to it.

Light flake pool deck coating around a backyard pool, outdoor concrete coating in GlendoraWet areas

Pool decks

Slip-resistant texture and light colors that stay cooler for bare feet around the pool.

Coated backyard patio around a fire pit and spa, outdoor concrete coating in Charter OakPatios

Patios

A finished look for the slab out back, with a surface that sweeps and hoses clean.

Light flake coating on a covered side patio, outdoor concrete coating in La VernePaths

Walkways and side yards

Narrow paths that collect dirt and moss get sealed and gain grip.

White flake coated driveway apron by a garage, outdoor concrete coating in AzusaDriveways

Driveway aprons

The area where the driveway meets the garage gets a matching, durable coat.

Picking an outdoor color

How to pick a color and texture for outdoor concrete

Color changes how hot the surface gets in sun. Light blends and pale solid colors stay cooler under bare feet, and dark colors soak up heat. For a pool deck that faces west, a light blend is the safest pick.

Texture matters as much as color. Pool decks and steps need more grip than a covered patio, and a front walk needs enough grip for rainy mornings. We set the texture in the topcoat to match each area, so one job can have more grip by the pool and less on a covered patio. We do this on patios from Chino to Ontario.

Think about what touches the surface most. Planters and grills can leave rings, and pots drain water and minerals. Put saucers under pots and a mat under the grill. Outdoor coatings run $8 to $12 per sq ft, or $3,200 to $4,800 for an area of up to 400 sq ft, done in 1-2 days. Browse finished patios in our gallery.

Shade changes the choice too. A covered patio can take a darker blend or even a solid color, since the sun never hits it directly. An open pool deck facing south or west needs the lightest blend you like. Bring photos of the area at midday to the estimate, and we will hold chip samples against the concrete in the same light.

Dark coated pavers beside a garden wall, outdoor concrete coating in NorcoOutdoor concrete coating, Norco
Install schedule

How a 1-2 day outdoor install runs

Day one covers grinding, crack repair, cleaning and the basecoat with its broadcast. On a small patio the topcoat goes on the same day. Larger decks or areas with steps and coping take a second day.

You can walk on the coating the next morning. Pool furniture can go back after 24 hours, and cars can use a coated driveway after about 48 hours. We schedule outdoor work around the weather, since the slab has to be dry and rain-free during the install.

Pool owners should plan for the pool to stay open. We tape off coping and drains and keep the coating out of the water. For the garage behind the driveway, see our garage floor epoxy guide.

Coated concrete side yard walkway with a light flake finish, outdoor concrete coating in La VerneOutdoor concrete coating, La Verne
Built for Pomona sun

Why sun and heat decide the outdoor system

Pomona summers are hot and dry, and a dark patio can get too hot for bare feet by early afternoon. Light colors and fine flake blends reflect more sun and stay cooler, so we steer pool decks toward them.

UV is the other enemy. Standard epoxy turns yellow and chalky in sun within months, which is why we never use it as an outdoor topcoat. Polyaspartic, a type of polyurea, holds its color and stays flexible as the slab warms and cools.

Fall Santa Ana winds blow leaves, dust and ash onto patios. A sealed surface hoses clean instead of staining. For decorative finishes indoors, see flake epoxy and the color chart.

Coated backyard patio around a fire pit and spa, outdoor concrete coating in Charter OakOutdoor concrete coating, Charter Oak
Coating versus pavers or a new pour

Coating compared with pavers, stamped concrete and paint

Pavers and stamped concrete mean tearing out the old slab, which costs more and takes longer. A coating reuses the slab you have. Concrete paint is cheaper up front but peels and fades in sun within a season or two.

A coating does not fix a slab that is heaving, sinking or badly broken. Those need concrete repair first. We point that out at the estimate.

Need grip without color? A sand finish adds texture, and our quartz & sand finish page explains it.

Flake coated walkway leading to a gazebo, outdoor concrete coating in La VerneOutdoor concrete coating, La Verne
Getting the area ready

What to clear before we coat a patio or pool deck

Move furniture, grills, planters and pool toys off the area the day before. Turn sprinklers off the night before and the day of the install so the concrete stays dry. If a pool deck is the job, keep the pool cover off and the pump running as usual.

We cover pool tile, door thresholds and the bottom of stucco walls with tape and plastic before grinding. The grinder kicks up some dust, so close nearby windows. The crew rinses and vacuums the concrete before the basecoat goes down.

You can walk barefoot on the coated area the next day. Wait a few days before you drag heavy planters back. On sunny lots in La Verne and San Dimas, pick a light blend so the deck stays cooler in July.

Flake coated walkway leading to a gazebo, outdoor concrete coating in La VerneOutdoor concrete coating, La Verne
Cracks, joints and drainage

How we handle cracks, joints and standing water outdoors

Outdoor concrete moves more than a garage slab. Sun heats it in the afternoon and it cools at night, so cracks open and close through the year. We fill small cracks with a flexible repair compound before coating so the patch can move a little without breaking the coating above it.

Control joints, the straight cuts in the slab, are there on purpose. A good outdoor install keeps those joints open, so the slab can still crack where it was meant to. Covering them over leads to a jagged crack later.

A coating follows the slope of the concrete. If water already pools in one spot, it will pool there after coating too. We point those spots out at the estimate. Check yours after the next rain, whether it is a driveway apron in Diamond Bar or a patio in Claremont.

White flake coated driveway apron by a garage, outdoor concrete coating in AzusaOutdoor concrete coating, Azusa
Outdoor prices

Outdoor coating prices next to garage systems

A 400 sq ft outdoor area runs $3,200-$4,800. Projects start at $2,600.

SystemPer sq ftTypical two-car garage (up to 400 sq ft)Install time
Patio, driveway & pool deck coating$8-$12 per sq ft$3,200-$4,8001-2 days
Flake epoxy$6.50-$10 per sq ft$2,600-$4,0001 day

Prices and details reviewed November 2026.

Send photos of your patio or deck with the estimate form.

Outdoor floors

Patios, paths and pool decks

Tap a photo to see it full size.

Related pages

Indoor floors and more

Most outdoor jobs pair with a garage floor.

Outdoor questions

Patio, driveway and pool deck questions

How much does pool deck coating cost in Pomona?

Patio, driveway and pool deck coating costs $8 to $12 per sq ft. A 400 sq ft area runs $3,200 to $4,800 and takes 1-2 days, including grinding, repairs, a decorative broadcast and a slip-resistant polyaspartic topcoat.

Is a coated pool deck slippery?

We build every outdoor coating with a broadcast and a textured topcoat for grip when wet. Any wet surface gets slicker, so the texture is chosen for how the area is used.

Will the coating get hot in summer?

Dark colors absorb more heat. Light colors and fine flake blends stay cooler underfoot, so we recommend them for pool decks and patios in full sun.

Will an outdoor coating yellow?

Not with our system. Outdoor topcoats are UV-stable polyaspartic, which holds its color in sun. Standard epoxy yellows outside, so we never use it as an outdoor topcoat.

Can you coat a cracked driveway?

We repair and coat cracks in sound concrete. Slabs that are heaving or sinking need concrete repair first, and we point that out before you decide.

How long until I can use my patio?

You can walk on it the next morning, put furniture back after 24 hours and drive on a coated driveway after about 48 hours.

Is coating cheaper than resurfacing?

Coating the existing slab usually costs less than pouring a new overlay or installing pavers, and it is done in 1-2 days.

Do you coat steps and pool coping?

We coat concrete steps and the deck up to the coping. Stone or tile coping stays as it is, and we tape it off.

Free on-site estimate

Ready to see your slab coated?

We measure, test the concrete for moisture and give you a written price before any work starts. Projects start at $2,600.