Warehouse aisles in City of Industry
Grind and seal or epoxy systems for dust control.



Warehouse, shop and showroom floors for businesses in the City of Industry, quoted after a free site visit.
★★★★★ 5-Star Rated · 93 reviews on Google, Facebook, Houzz & more
Free on-site estimate
Tell us about the floor and we will call you back to book a visit.
Commercial floors in the City of Industry are quoted after a free site visit. Forklift traffic, chemicals, work hours and slab condition all change the system, so a flat rate would not be honest. Read how we scope the work on our commercial epoxy flooring page.
The city incorporated on June 18, 1957, and it is almost entirely industrial, with 264 residents in the 2020 census and more than 3,000 businesses. Questions about tenant improvements go to the City of Industry.
We are based in Pomona, east of Industry along the 60. At the site visit we test the slab, map the zones and give you a written quote.
Grind and seal floor, City of IndustryGrind and seal or epoxy systems for dust control.
Chemical resistant topcoats where spills happen.
Metallic or flake floors that photograph well.
Easy-clean solid color.
Each system links to its page. Business work carries a limited lifetime adhesion warranty and a UV-stable polyaspartic topcoat.
Durable chips for showrooms and break areas with heavy foot traffic.
Flake epoxy detailsA bright single color for clean rooms and back offices.
Solid color epoxy detailsA polished look for showrooms and lobbies.
Metallic epoxy detailsTexture for ramps, wash bays and wet rooms.
Quartz & sand finish detailsThe Industry Hills area holds golf courses and an expo center, and it is set to host mountain biking for the 2028 Summer Olympics. Venues and event spaces need floors that handle crowds.
For those, we quote commercial epoxy flooring after a free site visit. Need an outdoor walkway or loading slab done too? Ask about our outdoor concrete coatings.
Grind and seal floor, City of IndustryAbout 67,000 people work in the City of Industry, which makes it one of the largest job centers in the area. Most floors here belong to warehouses, plants, distribution centers and showrooms.
For aisles with dust and light traffic, a grind and seal finish locks down the slab at $6.50 to $9 per sq ft. For wet rooms and ramps, a quartz & sand finish adds grip.
The Industry Metrolink station, opened in 1993 near the 60 and 57 freeway interchange, puts many sites close to rail and two freeways. Floors at loading areas take the heaviest wear.
Grind and seal floor, City of IndustryBusiness floors follow a plan we set at the site visit.
We map zones, traffic and chemicals with your team.
Each zone is ground, repaired and cleaned.
The system goes down zone by zone.
Zones reopen after cure on the agreed schedule.
Showrooms and offices in Industry want a floor that looks finished and cleans fast. A metallic epoxy floor gives a showpiece look, and solid color epoxy suits back offices and break rooms.
We split big jobs into zones so part of your floor stays open, and every zone gets its own line on the written quote.
Grind and seal floor, City of IndustryThese home prices show what a typical two-car garage of up to 400 sq ft costs. Commercial floors in the City of Industry are quoted after a free site visit.
| System | Per sq ft | Typical two-car garage (up to 400 sq ft) | Install time |
|---|---|---|---|
| Flake epoxy | $6.50-$10 per sq ft | $2,600-$4,000 | 1 day |
| Solid color epoxy | $9.50-$11.50 per sq ft | $3,800-$4,600 | 3 days |
| Metallic epoxy | $12.50-$18.50 per sq ft | $5,000-$7,400 | 3-4 days |
| Quartz & sand finish | $9-$16.50 per sq ft | $3,600-$6,600 | 2-3 days |
| Grind and seal | $6.50-$9 per sq ft | $2,600-$3,600 | 1-2 days |
| Patio, driveway & pool deck coating | $8-$12 per sq ft | $3,200-$4,800 | 1-2 days |
| Commercial & industrial | Quoted after a free site visit | Quoted after a free site visit | Depends on size and downtime |
Prices and details reviewed November 2026.
Request your visit on our contact page.
Commercial floors are quoted after a free site visit, since traffic, chemicals and work hours change the system. Grind and seal starts at $6.50 to $9 per sq ft.
Yes. We split large floors into zones and schedule each one around your hours.
No. We are based in Pomona and drive to Industry for site visits and installs.
Yes. Every slab gets a moisture test, and high readings get a moisture-barrier epoxy basecoat.
Metallic and flake are both popular for showrooms. We quote them after a free site visit.
Yes. Nearby homes in Walnut, La Puente and Hacienda Heights get our standard home pricing, starting at $2,600.
Yes. Event and expo floors are quoted after a free site visit.
We cover 91714, 91715 and 91716.
We zone the work so part of the floor stays open while each section cures.
Yes, for the few homes in town, at our standard prices from $2,600.
We also work in these nearby areas.
We measure, test the concrete for moisture and give you a written price before any work starts. Projects start at $2,600.