Based in Pomona, CA. Free on-site estimates across the Pomona Valley. Call (909) 699-1776
Dense multi-color broadcast epoxy floor surface, quartz and sand finish floor in Corona
Speckled commercial epoxy floor in a warehouse, quartz and sand finish floor in Ontario
Dark flake shop floor with yellow walls, quartz and sand finish floor in Jurupa Valley
Traction first

Quartz & Sand Finish Floors

Colored quartz or silica sand broadcast into epoxy and locked under clear or pigmented coats, for floors that stay wet or slope.

  • Textured, slip-resistant surface
  • Hard-wearing broadcast layer
  • Installed in 2-3 days
  • Limited lifetime adhesion warranty

★★★★★ 5-Star Rated · 93 reviews on Google, Facebook, Houzz & more

Free on-site estimate

Tell us about the floor and we will call you back to book a visit.

Or call (909) 699-1776

Projects from$2,600two-car flake garage, installed
Flake install1 daywalk on it the same night
WarrantyLimited lifetimeadhesion warranty, in writing
EstimateFreeon-site, with a moisture test
Quartz pricing

How much does a quartz epoxy floor cost in Pomona?

A quartz or sand finish epoxy floor in Pomona costs $9 to $16.50 per square foot. A two-car area of up to 400 sq ft runs $3,600 to $6,600, installed over 2-3 days, including diamond grinding, repairs, the broadcast layers and the topcoats.

The range is wide because the build varies. A single broadcast of sand under a pigmented topcoat sits near the low end. A double broadcast of colored quartz under two clear coats, the build used for wash bays and kitchens, sits near the top.

Commercial kitchens and large plant floors are quoted after a site visit. Residential and small shop pricing is in the price table.

Blue and gray commercial flake floor close up, quartz and sand finish floor in OntarioQuartz and sand finish floor, Ontario
What quartz and sand finish mean

Hard aggregate in the resin, texture you can feel

A quartz floor uses colored ceramic-coated quartz granules instead of vinyl chips. The crew broadcasts the quartz into wet epoxy, lets it cure, sweeps off the excess, and often repeats the step for a thicker, denser layer. Clear coats lock the granules in and set how rough or smooth the surface feels.

A sand finish works the same way with clean silica sand, then pigmented coats go over the top. The result is a solid color floor with grip built into it, which suits ramps, steps, laundry rooms and pool equipment areas.

Quartz granules are much harder than vinyl flake, so the surface resists wear in spots that see grit and foot traffic all day. The trade-off is texture: a rougher floor grips better and takes a little more effort to mop. You choose the texture at the estimate.

Speckled commercial epoxy floor in a warehouse, quartz and sand finish floor in OntarioQuartz and sand finish floor, Ontario
Why choose quartz

What a quartz or sand finish floor does well

Quartz is the system for floors that are wet, sloped or busy.

Dense multi-color broadcast epoxy floor surface, quartz and sand finish floor in CoronaAnti-slip

Grip when wet

The broadcast aggregate gives shoes a texture to hold, even with water on the floor.

Dark flake shop floor with yellow walls, quartz and sand finish floor in Jurupa ValleyDurable

Hard wearing

Quartz granules resist scuffing and grit better than vinyl flake in high traffic.

Charcoal flake floor in a narrow tenant space, quartz and sand finish floor in FontanaSlopes

Ramps and steps

Sloped driveways into garages and short steps get grip where people slip most.

Gray solid epoxy floor in a utility room, quartz and sand finish floor in BreaWet rooms

Wash and utility rooms

Laundry rooms, pool equipment rooms and car wash bays stay safer underfoot.

Where quartz pays off

Rooms and spaces where quartz is the better pick

Mud rooms, laundry rooms and the step from a garage into the house see wet shoes and spills. A quartz or sand finish gives those spots grip that a smooth floor lacks. Garages that slope to the door and get rain blowing in also do well with it.

Business floors are a strong fit: commercial kitchens, wash bays, locker rooms, breweries and shop floors that get hosed down. In those spaces, the texture and the hard aggregate stand up to boots and carts better than flake, and the floor stays safe when wet.

Quartz is less of a fit for bedrooms, living rooms and home gyms where you go barefoot. A smooth solid color or metallic epoxy floor suits those better. Quartz floors run $9 to $16.50 per sq ft, or $3,600 to $6,600 for a two-car garage of up to 400 sq ft, over 2-3 days.

You can mix systems in one house: flake in the garage, quartz in the laundry room and a smooth floor in the gym. One visit covers all of them, and the written quote lists each area. If your home in Claremont or San Dimas has a mud room off the garage, that split fits well.

Blue and gray commercial flake floor close up, quartz and sand finish floor in OntarioQuartz and sand finish floor, Ontario
Install schedule

How the 2-3 day quartz install runs

Day one is grinding, repairs and the first epoxy coat with its broadcast. The broadcast cures overnight. Day two the crew sweeps and vacuums the excess, and either broadcasts a second layer or rolls the first sealing coat. On a single broadcast build the final coat goes on the same day.

You can walk on the floor 12 to 24 hours after the final coat, and drive on it after about 48 hours. Rolling loads and forklifts wait a few days more.

Want a decorative look with less texture? Flake epoxy gives a softer feel and a one-day install, and our garage floor epoxy guide compares both.

Blue and gray commercial flake floor close up, quartz and sand finish floor in OntarioQuartz and sand finish floor, Ontario
Where quartz fits in Pomona

Wet rooms, sloped garages and busy shop floors

Many Pomona garages sit below the driveway with a short ramp at the door, where rain and hose water run in. A quartz or sand finish strip at the apron gives grip right where cars and shoes meet water.

Pool equipment rooms and side yards that stay damp also suit a sand finish. For the pool deck itself, our outdoor coatings use a slip-resistant polyaspartic build made for full sun.

In a business, quartz fits restrooms, break rooms and food prep areas. Larger commercial kitchens and plant floors have their own requirements, and we quote them on our commercial floors page after a site visit.

Charcoal flake floor in a narrow tenant space, quartz and sand finish floor in FontanaQuartz and sand finish floor, Fontana
Quartz versus flake

How quartz compares with flake and grind and seal

Quartz grips better and wears harder than flake, takes a day or two longer, and costs more per square foot. Flake looks more decorative and feels smoother. Many floors combine them: flake in the parking area and a quartz strip at the door.

Against grind and seal, quartz adds a thick wear layer and real texture. Grind and seal leaves the concrete look and only protects the surface.

Against solid color epoxy, a sand finish gives you the same plain color with grip built in, at a slightly higher price.

Dark flake shop floor with yellow walls, quartz and sand finish floor in Jurupa ValleyQuartz and sand finish floor, Jurupa Valley
Choosing the texture

How much grip a quartz or sand floor should have

We set the texture by the grit size and by how many clear coats go over it. One clear coat over the broadcast leaves a sharp, sandpaper feel that holds well on ramps and wet entries. Two coats round it off so the floor feels like fine grit under bare feet.

Laundry rooms, mud rooms and garages with a slope to the door usually want a medium texture. Food prep areas and wash bays want more. Rooms where you walk barefoot want less. Tell us how the room gets used and we pick the grit with you at the estimate.

Quartz comes in colored blends, and sand gives a natural tan look for less. Both use the same epoxy basecoat and polyaspartic topcoat as our flake floors. We install quartz floors in Chino shops and La Verne homes on the same 2-3 day schedule.

Speckled commercial epoxy floor in a warehouse, quartz and sand finish floor in OntarioQuartz and sand finish floor, Ontario
Cleaning a textured floor

How to keep a quartz floor clean

Texture holds more dirt than a smooth floor, so you clean it a little differently. Use a stiff deck brush or a soft bristle floor machine with a mild cleaner, then squeegee the water toward the door or a drain. A string mop snags on the grit.

In a garage, rinse the floor with a hose twice a year and push the water out with a squeegee. In a wet room, wipe up standing water each evening so minerals do not leave white spots on the topcoat.

If the texture wears smooth in a high traffic lane after years of use, we can lightly scuff the floor and add a fresh coat with new grit. That costs far less than a new floor. Business owners in Ontario can ask about full commercial systems at the site visit.

Dark flake shop floor with yellow walls, quartz and sand finish floor in Jurupa ValleyQuartz and sand finish floor, Jurupa Valley
Quartz prices

Quartz prices next to flake and grind and seal

Typical two-car area means up to 400 sq ft. Projects start at $2,600.

SystemPer sq ftTypical two-car garage (up to 400 sq ft)Install time
Quartz & sand finish$9-$16.50 per sq ft$3,600-$6,6002-3 days
Flake epoxy$6.50-$10 per sq ft$2,600-$4,0001 day
Grind and seal$6.50-$9 per sq ft$2,600-$3,6001-2 days

Prices and details reviewed November 2026.

Tell us about the room on the contact page and we will suggest a build.

Textured floors

Broadcast and textured floors

Tap a photo to see it full size.

Related pages

Other systems to compare

See prices and photos for each.

Quartz questions

Questions about quartz and sand finish floors

How much does a quartz epoxy floor cost in Pomona?

A quartz or sand finish floor costs $9 to $16.50 per sq ft. A two-car area of up to 400 sq ft runs $3,600 to $6,600 installed over 2-3 days, including grinding, repairs, the broadcast layers and the topcoats.

What is the difference between quartz and sand finish?

Quartz uses colored ceramic-coated quartz granules, usually under clear coats, for a decorative textured floor. Sand finish uses silica sand under pigmented coats, for a plain color with grip.

Is quartz flooring hard to clean?

It takes a bit more effort than a smooth floor because of the texture. A stiff deck brush or an auto scrubber with a soft pad works well. We can make the texture finer if easy mopping matters more than grip.

Can I put quartz on only part of the garage?

Yes. A common layout is flake in the parking area with a quartz or sand finish strip at the door apron, where water and shoes meet.

How long until I can use a quartz floor?

You can walk on it 12 to 24 hours after the last coat and drive on it after about 48 hours. Heavy rolling loads should wait a few days longer.

Is quartz good for a laundry room?

Yes. A sand finish or light quartz broadcast gives grip around washers and sinks and handles splashes without soaking in.

Do you install quartz in commercial kitchens?

We install quartz systems in business spaces. Commercial kitchens are quoted after a free site visit so we can check drains, slopes, traffic and the cleaning chemicals used.

Can quartz go outside?

For full sun on patios and pool decks we use a UV-stable polyaspartic outdoor system instead. Outdoor coating costs $8 to $12 per sq ft, with a 1-2 day install.

Free on-site estimate

Ready to see your slab coated?

We measure, test the concrete for moisture and give you a written price before any work starts. Projects start at $2,600.