San Dimas garages
Two-car and three-car garages in Via Verde and the foothills.


Garage floors, patio coatings and showroom floors for San Dimas, from the Western-style downtown to Via Verde and the canyon homes up north.
★★★★★ 5-Star Rated · 93 reviews on Google, Facebook, Houzz & more
Free on-site estimate
Tell us about the floor and we will call you back to book a visit.
Garages come first, with patios and storefronts close behind.
Two-car and three-car garages in Via Verde and the foothills.
Cooler, slip-resistant coatings for backyard concrete.
Decorative floors for downtown retail and salons.
Flake or solid floors for detached shops and studios.
San Dimas epoxy flooring starts at $2,600. A two-car flake garage of up to 400 sq ft costs $2,600 to $4,000 and takes one day, with grinding, crack repair, a moisture-barrier basecoat, a full flake broadcast and a polyaspartic topcoat in the price.
Ping Epoxy Floors is based in Pomona, southeast of San Dimas across the 57, and we drive out for every San Dimas estimate. The estimate is free and happens at your home, where we test the slab and bring flake samples you can hold up in your own garage light.
Each floor gets diamond grinding before anything else and carries a limited lifetime adhesion warranty. Questions about permits for additions or garage conversions go to the City of San Dimas. A coating over your existing slab does not need one.
Outdoor concrete coating, San DimasSan Dimas sits under the San Gabriel Mountains, and fall Santa Ana winds can push dust and leaves into an open garage. On windy days the crew keeps the garage door down while the coats cure, which protects the finish from debris.
Summer heat speeds up cure times, so the crew starts early and works in shade where it can on outdoor jobs. Pool decks and patios in full sun get our UV-stable polyaspartic topcoat, which holds its color better than plain epoxy outdoors.
If you have more than one area to coat, such as a garage and a pool deck, we quote both on the same visit. Compare systems on our garage floor epoxy page.
If your lot near Via Verde or up the canyon has a garage, a patio and a side walk, you can coat all three on one visit, and each area gets the system that suits it: flake in the garage, a textured outdoor coating by the pool and a light blend on the walk. Every area gets its own line on the written quote, so you can do it all at once or in stages. Summer heat in San Dimas shortens the working time of the resin, so the crew coats outdoor areas early in the day and saves the garage for the afternoon.
Our flake process on a San Dimas garage runs in this order.
A moisture reading and a crack check set the plan for your slab.
Diamond grinding removes the smooth top layer and any old paint.
Cracks and chips are filled, then ground even with the slab.
Canyon dust and grinding dust both get vacuumed out.
A moisture-barrier epoxy base goes on in the chip tint.
The crew covers the wet base completely with flake.
The cured surface is scraped and vacuumed so it feels even.
A clear polyaspartic coat seals the floor, walkable that night.
San Dimas takes its name from San Dimas Canyon in the mountains to the north, and the city runs from the foothills down past Route 66 to Via Verde. The city has a warm-summer Mediterranean climate, with hot, dry summers and mild winters.
Foothill homes catch more wind and more sun than the flatland tracts, and patios and pool decks there heat up fast. A light, slip-resistant polyaspartic coating keeps those slabs cooler and safer. Our outdoor concrete coatings page has the details.
Canyon lots also see more dirt and leaf litter blown into garages. A sealed floor sweeps clean, and a mid-gray flake epoxy blend hides the dust between cleanings.
Every card links to the system page with prices and answers.
The easy pick for San Dimas garages that see cars and canyon dust.
View flakeThe area began as part of Rancho San Jose and was later known as La Cienega Mud Springs. Historic Route 66 shaped its growth in the early 20th century, and San Dimas incorporated as a city in 1960. Today it is known for its Western art and Western-style downtown.
That timeline shows up in the garages. Homes near downtown and Route 66 include older properties with worn slabs, while Via Verde and much of the city date from the postwar decades on. Most of those slabs are sound and fully cured, and they need a proper grind.
All of San Dimas is ZIP 91773. Downtown storefronts and small showrooms often want a floor that looks finished and mops clean, which is where metallic epoxy and our commercial floors come in.
San Dimas is home to Raging Waters Los Angeles, the largest water park in California, and to the Pacific Railroad Museum in the former Santa Fe depot on Bonita Avenue. Bonelli Regional Park and the San Dimas Canyon Nature Center sit at the edges of town.
If your San Dimas home has a pool, a deck coating keeps bare feet cooler than raw concrete and adds grip, and it runs $8 to $12 per sq ft. Read the details on our outdoor concrete coatings page.
About 72.8% of San Dimas homes are owner occupied, per the 2010 census. If you store a boat, a trailer or off-road gear in the garage, a full broadcast flake floor handles the weight and the dirt. You can compare blends on the color chart.
Typical two-car garage means up to 400 sq ft. Projects start at $2,600. Shops and commercial spaces get a written quote after a free site visit.
| System | Per sq ft | Typical two-car garage (up to 400 sq ft) | Install time |
|---|---|---|---|
| Flake epoxy | $6.50-$10 per sq ft | $2,600-$4,000 | 1 day |
| Solid color epoxy | $9.50-$11.50 per sq ft | $3,800-$4,600 | 3 days |
| Metallic epoxy | $12.50-$18.50 per sq ft | $5,000-$7,400 | 3-4 days |
| Quartz & sand finish | $9-$16.50 per sq ft | $3,600-$6,600 | 2-3 days |
| Grind and seal | $6.50-$9 per sq ft | $2,600-$3,600 | 1-2 days |
| Patio, driveway & pool deck coating | $8-$12 per sq ft | $3,200-$4,800 | 1-2 days |
| Commercial & industrial | Quoted after a free site visit | Quoted after a free site visit | Depends on size and downtime |
Prices and details reviewed November 2026.
Book a San Dimas estimate on our contact page or check blends on the color chart.
An epoxy garage floor in San Dimas costs $2,600 to $4,000 for a two-car flake floor of up to 400 sq ft, done in one day. The same garage in solid color is $3,800 to $4,600, or $5,000 to $7,400 in metallic.
Yes. Retail and showroom floors are quoted after a free site visit. Metallic and flake are the usual choices, and we can schedule around store hours.
Yes. A pool deck coating costs $8 to $12 per sq ft, and the crew needs 1-2 days. We use a slip-resistant, UV-stable polyaspartic finish in a light color.
Older slabs often have paint or stains and more cracks, so they take more grinding and repair. We include that in the written estimate.
You can walk on flake that evening and park after 24 hours. Solid color takes 3 days and metallic 3-4 days.
We test every slab. A damp reading means a moisture-barrier basecoat and a flake system, which tolerates moisture better than solid or metallic.
Yes. Each floor carries a limited lifetime adhesion warranty on the bond between coating and concrete, with written terms at the estimate.
Besides San Dimas, we serve La Verne, Glendora, Covina, Walnut, Pomona and the rest of the Pomona Valley.
Yes. We coat pool decks across San Dimas. A coated deck stays cooler underfoot than raw concrete, adds grip and costs $8 to $12 per sq ft, installed in 1-2 days.
Yes. A flake floor over a diamond-ground slab handles trailer tongue jacks and boat weight. Put a plywood pad under the jack stand to spread the load on the topcoat.
We measure, test the concrete for moisture and give you a written price before any work starts. Projects start at $2,600.