Chino garages
Two- and three-car garages from The Preserve to the older tracts.


Garage floors, shop floors and outdoor coatings for Chino, from new homes in The Preserve to older ranch lots near Central Avenue.
★★★★★ 5-Star Rated · 93 reviews on Google, Facebook, Houzz & more
Free on-site estimate
Tell us about the floor and we will call you back to book a visit.
Chino grew up on agriculture, and dairy farming carried the area from the 1950s through the 1980s. Some older lots still have barns, workshops and long garages with heavy-use slabs that have seen tractors, oil and decades of wear. Those floors take more grinding and repair, and they come out best in flake or a quartz & sand finish.
Newer neighborhoods such as The Preserve and College Park have recent slabs that are flat and dense. They are good candidates for any system, including solid color epoxy, as long as they pass the moisture test.
Chino covers ZIP codes 91708 and 91710. If your garage has a third bay you use as a gym or workshop, we can coat the whole garage in one system or split it.
Chino lots often have more concrete than a single garage.
Two- and three-car garages from The Preserve to the older tracts.
Heavy-use outbuilding floors, quoted after a site visit.
Slip-resistant coatings that hold up in Inland sun.
Commercial floors with striping and safety lanes.
Chino sits about 35 miles from Los Angeles and 26 miles from Riverside, with Pomona to the northwest. That puts most of the city a short drive from our base, so a free estimate in Chino is easy to set up.
Chino has a hot-summer Mediterranean climate. Long hot days speed up resin cure, so the crew plans each step around the temperature and starts early on summer days. On the rare cold morning, the crew waits for the slab to warm before the basecoat goes down.
Ranch lots in Chino often have more than one slab: a garage, a shop and a patio. We quote each one on the same visit and can install them in one trip. See prices for shops and patios on our outdoor concrete coatings and grind and seal pages.
A shop slab often sees heavier use than a garage: tractors, trailers, welding carts and oil changes. For that kind of work, ask about a thicker basecoat and a quartz broadcast, or a plain ground and sealed slab if you only want dust control. We walk you through both at the estimate and put each option on the written quote, so you can pick the one that fits the way you use the building.
A two-car epoxy garage floor in Chino costs $2,600 to $4,000 with a flake system of up to 400 sq ft, and the crew finishes it in one day. Solid color sits at $3,800 to $4,600, with metallic at $5,000 to $7,400. Every project starts at $2,600.
We drive in from Pomona, which sits northwest of Chino across the county line. Chino is in San Bernardino County, so additions, garage conversions and new outbuildings go through the City of Chino building division. Coating an existing slab changes nothing structural.
At the free estimate we test the slab for moisture, look at cracks and stains, and show you flake samples in your own garage light. Each floor gets diamond grinding and carries a limited lifetime adhesion warranty on the bond.
Commercial epoxy floor, ChinoChino has a hot-summer Mediterranean climate: long, hot summers, short wet winters and chilly mornings that often sit in the 40s. That daily swing makes concrete expand and contract, and it is hard on coatings that cannot flex.
A garage slab in a Chino August can stay hot long after sunset. Cheap epoxy softens under hot tires and lets go. Our UV-stable polyaspartic topcoat is rated for hot-tire pickup and stays flexible through the swing from cold mornings to hot afternoons.
Rain mostly arrives in winter and peaks in February, so we plan outdoor jobs around dry stretches. For patios and pool decks, see our outdoor concrete coatings page.
This is our flake process on a Chino garage, from survey to topcoat.
The crew checks moisture and looks for oil soaked in from years of use.
Oil-stained areas get extra grinding so the coating bonds to clean concrete.
Cracks and spalls get polyurea filler, ground flat when hard.
A HEPA vacuum clears grinding dust from the slab and corners.
A moisture-barrier epoxy base goes down in a tint that suits the flake blend.
The base is covered edge to edge with a full broadcast of chips.
Loose chips come off and the floor is vacuumed clean.
A polyaspartic topcoat seals the floor for Chino heat.
Every card opens the full system page with prices and photos.
Grip for wash-down workshops, barns and utility rooms.
Quartz finishChino grew on the Rancho Santa Ana del Chino land grant and incorporated in 1910. The Chino Valley sits on an alluvial plain with topsoil up to 4 feet deep, and it was a farming center from the 1890s into the mid-20th century. Some of that ranch land is now homes and business parks.
On older ranch lots, you may have a detached shop or barn slab with no vapor barrier under it. We test those slabs for moisture and use a moisture-barrier basecoat when the reading calls for it. Newer homes in The Preserve sit on recent slabs, and they still get the same grind and test.
The city had 91,403 people in the 2020 census, and about 68.9% of occupied homes were owner occupied in 2010. Owners with shops pick grind and seal or flake, and owners with new garages often pick a full broadcast flake floor from the color chart.
Typical two-car garage means up to 400 sq ft. Projects start at $2,600, and business floors are quoted after a free site visit.
| System | Per sq ft | Typical two-car garage (up to 400 sq ft) | Install time |
|---|---|---|---|
| Flake epoxy | $6.50-$10 per sq ft | $2,600-$4,000 | 1 day |
| Solid color epoxy | $9.50-$11.50 per sq ft | $3,800-$4,600 | 3 days |
| Metallic epoxy | $12.50-$18.50 per sq ft | $5,000-$7,400 | 3-4 days |
| Quartz & sand finish | $9-$16.50 per sq ft | $3,600-$6,600 | 2-3 days |
| Grind and seal | $6.50-$9 per sq ft | $2,600-$3,600 | 1-2 days |
| Patio, driveway & pool deck coating | $8-$12 per sq ft | $3,200-$4,800 | 1-2 days |
| Commercial & industrial | Quoted after a free site visit | Quoted after a free site visit | Depends on size and downtime |
Prices and details reviewed November 2026.
Set up a Chino estimate through the contact page or compare more floors in our gallery.
An epoxy garage floor in Chino costs $2,600 to $4,000 for a two-car flake floor of up to 400 sq ft, done in one day. Expect $3,800 to $4,600 for solid color and $5,000 to $7,400 for metallic.
Yes. Workshops, barns and other outbuildings are quoted after a free site visit because the size, slab condition and use vary so much. Heavy-use floors often get flake or a quartz finish.
Yes. We seal every floor with a UV-stable polyaspartic topcoat rated for hot-tire pickup, and it stays flexible through hot days and cold mornings.
Usually, yes. We grind oil-soaked areas deeper and clean them before the basecoat. Very deep contamination can need extra treatment, and we tell you at the estimate.
Yes. New slabs are flat and strong, which suits any system. They still need diamond grinding, since the smooth builder finish gives a coating nothing to grip.
A flake garage takes one day. Solid color takes 3 days, metallic 3-4 days, and patios and pool decks 1-2 days.
No permit is needed to coat an existing slab. Additions, conversions and new outbuildings go through the City of Chino building division.
We cover 91708 and 91710, along with Chino Hills, Ontario, Montclair and Pomona.
Yes. We coat detached shops, barns and workshops. Older slabs on ranch lots often have no vapor barrier, so we test for moisture and add a moisture-barrier basecoat when the reading calls for it.
Yes. We coat garages in The Preserve, College Park and the rest of Chino. A flake floor for a two-car garage of up to 400 sq ft costs $2,600 to $4,000 and takes one day.
We also work in these neighboring cities.
We measure, test the concrete for moisture and give you a written price before any work starts. Projects start at $2,600.